RapidMATRIX System

Limited Entry Acid Stimulation

Packers Plus RapidMATRIX® multi-stage completion systems are specifically designed for effective acid stimulation. Using limited entry, the RapidMATRIX system evenly distributes stimulation fluid across isolated intervals.

For each treatment zone, the RapidMATRIX system includes a number of QuickPORT™ sleeves flanked by RockSEAL® H2 packers. This configuration creates multiple, individually isolated treatment zones, or stages. Each treatment zone is activated by an actuation ball, which is available in multiple sizes, enabling several zones to be stimulated in succession. After stimulation, the well can be immediately flowed back and put on production.

Because the Packers Plus RapidMATRIX system is modular with regard to tool placement, it can be combined with other Packers Plus tools and systems, enabling customized design for targeted delivery of the stimulation program.

The RapidMATRIX limited entry system offers many features or benefits:

–Mechanical stage isolation with field-proven RockSEAL H2 packers
–Full stimulation coverage of entire horizontal
–Single, continuous pumping operation
–Consistent limited entry stimulation with QuickPORT sleeves
–Lower zones are isolated due to increasing ball size
–Immediate flowback after stimulation
–Improved production results
–Compatible with other Packers Plus tools and systems

The RapidMATRIX limited entry system can be used in many applications:

–Limited entry stimulation
–Open hole
–Horizontal and vertical wells
–Carbonate, sandstone, and naturally fractured formations
–Fracture acidizing
–Matrix acidizing
–Critical sour and HPHT

RapidMATRIX Limited Entry System

Learn more about Limited Entry with RapidMATRIX

Implementing Packers Plus completion systems resulted in significant initial and final production rate increases, compared to historical production values from the area

Read more

RapidMATRIX increases production from carbonate formation

Read more

Practical Aspects of Multi-stage Fracturing

See what the RapidMATRIX system is made of

RockSEAL H2 Packer

The RockSEAL H2 packer is a hydraulically set, mechanical packer. The dual-element design, along with premium seal technology, ensures reliable high-pressure zonal isolation during stimulation and throughout the life of the well. The RockSEAL H2 packer offers ease of installation through its short length, minimum outside diameter and anti-preset features. Hydraulic activation allows for precise control over the setting operation, resulting in time and cost efficiencies.

RockSEAL IIS Packer

The RockSEAL llS is a single-element, double-grip, hydraulically set retrievable open hole packer. It maintains the proven mechanical and element system of the dual-element packer along with an added anchoring capability. The anchoring slip design allows the packer to anchor the RapidMATRIX system at the toe of the well, wellbore junctions or other areas that require extra stability. This packer is typically run in conjunction with the RockSEAL H2 packer for added sealing capability, but can be used on its own as required.

QuickPORT Sleeve

The QuickPORT sleeve is a ball-actuated, hydraulically activated injection/production port. This sleeve allows for more than one stage to be activated with the same size actuation ball for limited entry batch fracturing. The QuickPORT sleeve flow ports are available in a variety of sizes to optimize the limited entry fracture treatment.

Hydraulic FracPORT Sleeve

The Hydraulic FracPORT sleeve is a hydraulically activated injection/production port used for the first stage of all Packers Plus stimulation system applications. This sleeve opens at a specific pressure allowing communication between the tool string and the annulus. The unique configuration of the Hydraulic FracPORT sleeve ensures full opening for effective stimulation of the first stage. The Hydraulic FracPORT sleeve is also available in a Drillable Closeable (DC) version that can be re-opened for future operations.

 Our commitment to quality

Packers Plus successful stimulation services begin with a fully integrated quality assurance and quality control (QA/QC) process that begins at the design stage and follows each tool through manufacturing, assembly, testing, shipping and installation. Automation and robotics are incorporated into our proven process to ensure consistency and repeatability of key criteria in each step as we design, develop and manufacture our patented tools and systems. As a commitment to quality and meeting stringent standards, Packers Plus has achieved ISO 9001 certification and  API Q1 Certification for our manufacturing and engineering operations in Edmonton, AB, and ISO 9001 in Houston, TX.

Read more about our world-class manufacturing capabilities.

Get in touch

Contact our Regional General Managers for more information

Erin Scott

Canada

+1 (403) 234-4088 erin.scott@packersplus.com

Jim Foster

US & Latin America

+1 (832) 627-3247 jim.foster@packersplus.com

Stuart Wilson

MENA

+971 (52) 979-9100 stuart.wilson@packersplus.com

Our systems & solutions

TREX Toe Sleeve

Hydraulic Toe Sleeve

TREX Liner Hanger

PrimeSET Liner Hanger

StackFRAC HD-X System

Multi-Stage Ball-Drop Completions

TREX Limited Entry

Cemented QuickPORT IV Sleeves

StackFRAC Slimhole System

Restimulation & Well Recovery

ePLUS Retina Monitoring System

Combining Electronics with Reliability

SwellPLUS Packer

Swellable Zonal Isolation

TREX Single Point Entry

Cemented Diffusor Sleeves

QuickFRAC Batch Stimulation System

Limited Entry Ball-Drop Completions